0
我正在构建一个存储过程，该存储过程将作为配置字符串代码读取器，它将采用@config varchar(255)变量。如何创建返回临时表？
This 配置字符串决定我们模型中的26个设置。
就拿配置字符串项之一：
declare @casingType varchar(50);
set @casingType=case SubString(@config, 34, 1)
when '1' then 'U-Flange - All Around w/ Stacking Flanges'
when '2' then 'U-Flange - All Around'
when '3' then 'U-Flange - No Top & Bottom'
when '4' then 'U-Flange - Flat Top & Bottom'
when '5' then 'Box Bracket - End Plates Only'
when '6' then 'Box Bracket - All Around'
when '7' then 'Slip & Drive Bracket'
when '8' then 'L Flange'
when '0' then 'No Casing'
when 'A' then '3 Sided Box - No Top & Bottom'
when 'B' then '3 Sided Box - Top & Bottom'
when 'C' then '3 Sided Box - Top or Bottom'
when 'D' then 'U-Flange w/ Stacking Plates'
when 'E' then 'U-Flange Temp Top & Bottom'
when 'F' then 'Flat Bracket'
when 'G' then 'A Coil Slab Bracket'
when 'H' then '2 Sided Box'
when 'I' then '3 Sided Box w/ Temp Top & Bottom'
when 'O' then 'One Plus One Casing'
when 'X' then 'Special'
when 'Y' then 'Auto Braze'
else 'Error' end;
我想返回是一个包含每个项目的文本字段一（1）行的表。
我是否创建临时表来返回或创建其他类型的表来返回？
我希望这是有道理的。我可能错误地使用了它，或者使用了不适当的SQL术语。
解决方案：所以，我得到了这个工作，这里是我用来做它的代码。
通常我们的销售人员或工程师从配置字符串不知道某个字母意味着什么，所以他们必须查找它。超过70％的时间，这导致更多的字母代码搜索。所以，我们只想返回与特定配置相关的所有细节。
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: Joe Pool
-- Create date: 21-22 January 2013
-- Description: This returns a DataTable representation of the Model Configuration
-- =============================================
CREATE PROCEDURE sp1_Configurator(@config varchar(255)) as
BEGIN
SET NOCOUNT ON;
declare @len int;
declare @coilType varchar(50), @coilPattern varchar(50), @rowsDeep varchar(50);
declare @finHeight varchar(50), @finLength varchar(50), @finThickMat varchar(50);
declare @finPerInch varchar(50), @finTreatment varchar(50), @finCoating varchar(50);
declare @tubeWallThk varchar(50), @tubeType varchar(50), @qty varchar(50);
declare @tubeCoat varchar(50), @gauge varchar(50), @material varchar(50);
declare @casingType varchar(50), @customerCode varchar(50), @caseCoat varchar(50);
declare @arrangement varchar(50), @connType varchar(50), @connSize varchar(50);
declare @distributor varchar(50), @circuitry varchar(50), @coilApp varchar(50);
declare @agency varchar(50), @outsideCoat varchar(50);
declare @table table (
CoilType varchar(50) null, CoilPattern varchar(50) null, RowsDeep varchar(50) null,
FinHeight varchar(50) null, FinLength varchar(50) null, FinThickMat varchar(50) null,
FinPerInch varchar(50) null, FinTreatment varchar(50) null, FinCoating varchar(50) null,
TubeWallThk varchar(50) null, TubeType varchar(50) null, Qty varchar(50) null,
TubeCoat varchar(50) null, Gauge varchar(50) null, Material varchar(50) null,
CasingType varchar(50) null, CustomerCode varchar(50) null, CaseCoat varchar(50) null,
Arrangement varchar(50) null, ConnType varchar(50) null, ConnSize varchar(50) null,
Distributor varchar(50) null, Circuitry varchar(50) null, CoilApp varchar(50) null,
Agency varchar(50) null, OutsideCoat varchar(50) null
);
set @len=Len(@config)
if (@len=53) begin
set @coilType=case SubString(@config, 1, 1)
when 'C' then 'Slab'
when 'B' then '1 + 1'
when 'A' then 'A Coil (OBS)'
when 'X' then 'Special'
else 'Error' end;
set @coilPattern=case SubString(@config, 2, 1)
when '7' then '7mm Tube (.827 x .472 Staggered)'
when '6' then '5/16" Tube (1 x 5/8 Staggered)(OBS)'
when '3' then '3/8" Tube (1 x .866 Staggered)'
when 'P' then '1/2" Tube (1 1/4 x 1.08 Staggered)'
when '5' then '5/8" Tube (1 1/2 x 1.299 Staggered)'
else 'Error' end;
set @rowsDeep=SubString(@config, 3, 2);
set @finHeight=SubString(@config, 6, 5);
set @finLength=SubString(@config, 12, 6);
set @finThickMat=case SubString(@config, 19, 1)
when 'A' then '.0045 AL (OBS)'
when 'J' then '.0055 AL (OBS)'
when 'B' then '.0060 AL'
when 'C' then '.0075 AL'
when 'D' then '.0100 AL'
when 'E' then '.0045 CU (OBS)'
when 'K' then '.0050 CU (OBS)'
when 'F' then '.0060 CU'
when 'G' then '.0075 CU (OBS)'
when 'H' then '.0100 CU (OBS)'
when 'P' then '.0065 Pre-Coated'
when 'X' then 'Special'
else 'Error' end;
set @finPerInch=SubString(@config, 20, 2);
set @finTreatment=case SubString(@config, 22, 2)
when 'FS' then 'Flat/Straight (OBS)'
when 'FR' then 'Flat/Rippled (OBS)'
when 'CS' then 'Corrugated/Straight (OBS)'
when 'CR' then 'Corrugated/Rippled'
when 'SS' then 'Sine/Straight (OBS)'
when 'SR' then 'Sine/Rippled'
when 'LS' then 'Louvered/Straight (OBS)'
when 'LR' then 'Louvered/Rippled (OBS)'
when 'RL' then 'Embossed Arch/Rippled*'
when 'XX' then 'Special'
else 'Error' end;
set @finCoating=case SubString(@config, 24, 1)
when 'N' then 'See Coil Coating'
when 'A' then 'Alodine (OBS)'
when 'K' then 'Technicoat'
when 'P' then 'Paint Bond'
when 'X' then 'Special'
else 'Error' end;
set @tubeWallThk=case SubString(@config, 26, 1)
when 'A' then '.012 Smooth (5/16)(OBS)'
when 'B' then '.014 Smooth (3/8)(OBS)'
when 'C' then '.017 Smooth (1/2)'
when 'D' then '.018 Smooth (5/8)'
when 'E' then '.025 Smooth (1/2, 5/8)'
when 'F' then '.035 Smooth (1/2, 5/8)'
when 'G' then '.049 Smooth (5/8)'
when 'H' then '.012 Rifled (3/8)'
when 'K' then '.012 Rifled (7mm)'
when 'L' then '.016 Rifled (7mm) (OBS)'
when 'P' then '.06 Rifled (1/2)'
when 'X' then 'Special (.016 Rifled 3/8)(OBS)'
else 'Error' end;
set @tubeType=case SubString(@config, 27, 1)
when '1' then 'ST Flexpand'
when '2' then 'ST ALL DL Flexpand'
when '3' then 'ST w/DLST Flexpand'
when '5' then 'HP Flexpand'
when '6' then 'HP w/ST Flexpand'
when 'A' then 'ST w/DL*'
when 'B' then 'HP w/DL*'
when 'C' then 'Hairpin w/Straight*'
when 'D' then 'Hairpin 1/Hairpin .8* (OB)'
when 'E' then 'HP/DL/ST*'
when 'F' then 'HP/DL/ST/ST DL*'
when 'G' then 'HP/DL ST*'
when 'H' then 'Hairpint (HP)'
when 'I' then 'HP/ST/DL HP*'
when 'J' then '.8 HP* (OBS)'
when 'K' then 'One Short HP/One Long HP*'
when 'L' then 'HP w/Special DL*'
when 'M' then 'HP w/Special DL/ST*'
when 'N' then 'HP 1/HP .8/ST* (OBS)'
when 'O' then 'HP 1/HP .8/DL 1 HP/DL .8 HP* (OBS)'
when 'P' then 'All DL ST'
when 'Q' then 'ST w/Special DL ST*'
when 'R' then 'HP .8/ST* (OBS)'
when 'S' then 'Straight (ST)'
when 'T' then 'Hydro Ball (HB)'
when 'U' then 'HB w/ DL*'
when 'V' then 'ST w/Spin Down*'
when 'W' then 'HP 7mm .827/.627 Angle*'
when 'Y' then 'HP 7mm All .627*'
when 'X' then 'Special*'
else 'Error' end;
set @qty=SubString(@config, 28, 2);
set @tubeCoat=case SubString(@config, 30, 1)
when 'N' then 'No Coating'
when 'T' then 'Tinned Plating (OBS)'
when 'X' then 'Special'
else 'Error' end;
set @gauge=case SubString(@config, 32, 1)
when '2' then '20 Gauge'
when '8' then '18 Gauge'
when '6' then '16 Gauge'
when '4' then '14 Gauge'
when '5' then '0.050" THK'
when '3' then '0.063" THK'
when '9' then '0.090" THK'
when 'X' then 'Special'
else 'Error' end;
set @material=case SubString(@config, 33, 1)
when 'G' then 'Galvanized'
when 'S' then 'Stainless'
when 'C' then 'Copper'
when 'A' then 'Aluminum'
when 'P' then 'Paint Bond'
when 'X' then 'Special'
else 'Error' end;
set @casingType=case SubString(@config, 34, 1)
when '1' then 'U-Flange - All Around w/ Stacking Flanges'
when '2' then 'U-Flange - All Around'
when '3' then 'U-Flange - No Top & Bottom'
when '4' then 'U-Flange - Flat Top & Bottom'
when '5' then 'Box Bracket - End Plates Only'
when '6' then 'Box Bracket - All Around'
when '7' then 'Slip & Drive Bracket'
when '8' then 'L Flange'
when '0' then 'No Casing'
when 'A' then '3 Sided Box - No Top & Bottom'
when 'B' then '3 Sided Box - Top & Bottom'
when 'C' then '3 Sided Box - Top or Bottom'
when 'D' then 'U-Flange w/ Stacking Plates'
when 'E' then 'U-Flange Temp Top & Bottom'
when 'F' then 'Flat Bracket'
when 'G' then 'A Coil Slab Bracket'
when 'H' then '2 Sided Box'
when 'I' then '3 Sided Box w/ Temp Top & Bottom'
when 'O' then 'One Plus One Casing'
when 'X' then 'Special'
when 'Y' then 'Auto Braze'
else 'Error' end;
set @customerCode=case SubString(@config, 35, 5)
when '00' then 'Standard'
when '14' then 'AAON Damper'
when '15' then 'AAON Cond.'
when '16' then 'AAON Evap.'
when 'XX' then 'Special'
else 'Error' end;
set @caseCoat=case SubString(@config, 37, 1)
when 'N' then 'See Coil Coating'
when 'A' then 'Alodine (OBS)'
when 'C' then 'Ceramic'
when 'X' then 'Special'
else 'Error' end;
set @arrangement=SubString(@config, 39, 2);
set @connType=case SubString(@config, 41, 1)
when '0' then 'No Connection'
when 'M' then 'MPT'
when 'F' then 'FPT'
when 'S' then 'Sweat'
when 'W' then 'Water Bead (OBS)'
when 'B' then 'Barbed FTG (OBS)'
when 'N' then 'Male Flare'
when 'G' then 'Female Flare'
when 'O' then 'Male O-Ring (OBS)'
when 'P' then 'Female O-Ring (OBS)'
when 'X' then 'Special'
else 'Error' end;
set @connSize=case SubString(@config, 42, 1)
when '0' then 'No Connection'
when '1' then '3/8 OD'
when '2' then '1/2 OD'
when '3' then '5/8 OD'
when '4' then '7/8 OD'
when '5' then '1-1/8 OD'
when '6' then '1-3/8 OD'
when '7' then '1-5/8 OD'
when '8' then '2-1/8 OD'
when '9' then '2-5/8 OD'
when 'A' then '3-1/8 OD'
when 'B' then '5/16 OD'
when 'C' then '3/4 OD'
when 'D' then '4-1/8 OD'
when 'E' then '3/16 OD'
when 'X' then 'Special'
else 'Error' end;
set @distributor=case SubString(@config, 44, 4)
when 'N000' then 'None Required'
when 'X001' then 'Special'
else 'Factory Assigned' end;
set @circuitry=case SubString(@config, 49, 2)
when 'SS' then 'Single Circuit'
when 'FF' then 'Full'
when 'HH' then 'Half'
when 'QQ' then 'Quarter'
when 'DD' then 'Double'
when 'DH' then '1-1/2'
when 'II' then 'Intertwined <2'
when 'RS' then 'Row Split <2'
when 'FS' then 'Face Split <2'
when '00' then 'No Circuitry'
when '01' then 'One Circuit'
when '02' then 'Two Circuits'
when '03' then 'Three Circuits'
when '04' then 'Four Circuits'
when '0S' then 'No Circuitry + SubCooler'
when '1S' then 'One Circuit + SubCooler'
when '2S' then 'Two Circuits + SubCooler'
when '3S' then 'Three Circuits + SubCooler'
when 'XX' then 'Special'
else 'Error' end;
set @coilApp=case SubString(@config, 51, 1)
when 'D' then 'Drainable Water'
when 'W' then 'Water'
when 'G' then 'Cond/SubCooler'
when 'C' then 'Condenser'
when 'E' then 'Evaporator'
when 'S' then 'Steam'
when 'N' then 'Steam Distributor'
when 'B' then 'Booster'
when 'H' then 'Heat Reclaim'
when 'P' then 'Heat Pipe (OBS)'
when 'L' then 'Glycol'
when 'O' then 'Oil (OBS)'
when 'X' then 'Special'
else 'Error' end;
set @agency=case SubString(@config, 52, 1)
when '0' then 'None'
when 'A' then 'ARI'
when 'B' then 'ARI + UL/CSA'
when 'C' then 'UL/CSA'
when 'E' then 'ETL/DOE'
else 'Error' end;
set @outsideCoat=case SubString(@config, 53, 1)
when 'N' then 'No Coating'
when 'A' then 'Ceramic'
when 'C' then 'Chromocoat'
when 'E' then 'Epoxy'
when 'G' then 'Americoat Grey (OBS)'
when 'H' then 'Heresite'
when 'K' then 'Phenolic (Technicoat)'
when 'L' then 'ElectroFin'
when 'P' then 'Phenolic (OBS)'
when 'X' then 'Special'
else 'Error' end;
insert into @table
(CoilType, CoilPattern, RowsDeep, FinHeight, FinLength, FinThickMat, FinPerInch, FinTreatment, FinCoating,
TubeWallThk, TubeType, Qty, TubeCoat, Gauge, Material, CasingType, CustomerCode, CaseCoat, Arrangement,
ConnType, ConnSize, Distributor, Circuitry, CoilApp, Agency, OutsideCoat)
values
(@coilType, @coilPattern, @rowsDeep, @finHeight, @finLength, @finThickMat, @finPerInch, @finTreatment, @finCoating,
@tubeWallThk, @tubeType, @qty, @tubeCoat, @gauge, @material, @casingType, @customerCode, @caseCoat, @arrangement,
@connType, @connSize, @distributor, @circuitry, @coilApp, @agency, @outsideCoat);
end
select * from @table;
END
GO
下面是一个实际的配置字符串的样子：
CP06-51.25-051.50-B12SRN-CT00N-8G2XXN-A2S8-N000-HHWAN
你能描述一下你需要做什么这个表格显示你想要输出的样子，并显示样本数据，所以我们有一些想法是什么“每个项目的文本字段”是什么意思？ –
我只希望我们的开发人员能够从我们的服务器上获取信息，并按列名获取数据。通过将其放置在数据库中的服务器上，我们可以在模型更改时快速更改。 – jp2code
对不起，我不认为这回答我的问题。哦，希望bluefeet的答案适合你。 –