0
我下载了nitroshare.tar.gz文件，因为我想将它安装在我的kali linux上。 我按照上面的说明在github页面上说过要安装它&下载了安装所需的所有软件包。未知Cmake commad qt5_wrap_ui
当我使用的cmake commad它显示我此错误
未知的CMake命令qt5_wrap_ui
下面是CMakeList.txt文件
cmake_minimum_required(VERSION 3.7)
configure_file(config.h.in "${CMAKE_CURRENT_BINARY_DIR}/config.h")
set(SRC
application/aboutdialog.cpp
application/application.cpp
application/splashdialog.cpp
bundle/bundle.cpp
device/device.cpp
device/devicedialog.cpp
device/devicelistener.cpp
device/devicemodel.cpp
icon/icon.cpp
icon/trayicon.cpp
settings/settings.cpp
settings/settingsdialog.cpp
transfer/transfer.cpp
transfer/transfermodel.cpp
transfer/transferreceiver.cpp
transfer/transfersender.cpp
transfer/transferserver.cpp
transfer/transferwindow.cpp
util/json.cpp
util/platform.cpp
main.cpp
)
if(WIN32)
set(SRC ${SRC} data/resource.rc)
endif()
if(APPLE)
set(SRC ${SRC}
data/icon/nitroshare.icns
transfer/transferwindow.mm
)
set_source_files_properties("data/icon/nitroshare.icns" PROPERTIES
MACOSX_PACKAGE_LOCATION Resources
)
endif()
if(QHttpEngine_FOUND)
set(SRC ${SRC}
api/apihandler.cpp
api/apiserver.cpp
)
endif()
if(APPINDICATOR_FOUND)
set(SRC ${SRC}
icon/indicatoricon.cpp
)
endif()
qt5_wrap_ui(UI
application/aboutdialog.ui
application/splashdialog.ui
device/devicedialog.ui
settings/settingsdialog.ui
transfer/transferwindow.ui
)
# Update the TS files from the source directory
file(GLOB TS data/ts/*.ts)
add_custom_target(ts
COMMAND "${Qt5_LUPDATE_EXECUTABLE}"
-silent
-locations relative
"${CMAKE_CURRENT_SOURCE_DIR}"
-ts ${TS}
)
# Create a directory for the compiled QM files
file(MAKE_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/data/qm")
# Create commands for each of the translation files
set(QM_XML)
set(QM)
foreach(_ts_path ${TS})
get_filename_component(_ts_name "${_ts_path}" NAME)
get_filename_component(_ts_name_we "${_ts_path}" NAME_WE)
set(_qm_name "${_ts_name_we}.qm")
set(_qm_path "${CMAKE_CURRENT_BINARY_DIR}/data/qm/${_qm_name}")
set(QM_XML "${QM_XML}<file>qm/${_qm_name}</file>")
list(APPEND QM "${_qm_path}")
add_custom_command(OUTPUT "${_qm_path}"
COMMAND "${Qt5_LRELEASE_EXECUTABLE}"
-compress
-removeidentical
-silent
"${_ts_path}"
-qm "${_qm_path}"
COMMENT "Generating ${_ts_name}"
)
endforeach()
# Create a target for compiling all of the translation files
add_custom_target(qm DEPENDS ${QM})
# Configure the i18n resource file
set(QRC_QM "${CMAKE_CURRENT_BINARY_DIR}/data/resource_qm.qrc")
configure_file(data/resource_qm.qrc.in "${QRC_QM}")
qt5_add_resources(QRC
data/resource.qrc
"${QRC_QM}"
)
add_executable(nitroshare WIN32 MACOSX_BUNDLE ${SRC} ${UI} ${QRC})
target_compile_features(nitroshare PRIVATE
cxx_lambdas
cxx_nullptr
cxx_strong_enums
cxx_uniform_initialization
)
# In order to support Retina, a special tag is required in Info.plist.
if(APPLE)
set_target_properties(nitroshare PROPERTIES
MACOSX_BUNDLE_INFO_PLIST "${CMAKE_CURRENT_SOURCE_DIR}/Info.plist.in"
MACOSX_BUNDLE_ICON_FILE "nitroshare.icns"
MACOSX_BUNDLE_GUI_IDENTIFIER "com.NathanOsman.NitroShare"
MACOSX_BUNDLE_BUNDLE_NAME "NitroShare"
)
target_link_libraries(nitroshare "-framework ApplicationServices")
endif()
target_link_libraries(nitroshare Qt5::Widgets Qt5::Network Qt5::Svg)
if(Qt5WinExtras_FOUND)
target_link_libraries(nitroshare Qt5::WinExtras)
endif()
if(Qt5MacExtras_FOUND)
target_link_libraries(nitroshare Qt5::MacExtras)
endif()
if(QHttpEngine_FOUND)
target_link_libraries(nitroshare QHttpEngine)
endif()
if(APPINDICATOR_FOUND)
target_include_directories(nitroshare PRIVATE ${APPINDICATOR_INCLUDE_DIRS})
target_link_libraries(nitroshare ${APPINDICATOR_LIBRARIES})
endif()
include(GNUInstallDirs)
install(TARGETS nitroshare
RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR}
BUNDLE DESTINATION .
)
if(WIN32)
# If windeployqt is available, use it immediately after the build completes to
# ensure that the dependencies are available.
include(DeployQt)
if(WINDEPLOYQT_EXECUTABLE)
windeployqt(nitroshare)
endif()
# If QHttpEngine was used, include it in the installer
if(QHttpEngine_FOUND)
add_custom_command(TARGET nitroshare POST_BUILD
COMMAND "${CMAKE_COMMAND}" -E
copy_if_different "$<TARGET_FILE:QHttpEngine>" "$<TARGET_FILE_DIR:nitroshare>"
COMMENT "Copying QHttpEngine..."
)
endif()
# If Inno Setup is available, provide a target for building an EXE installer.
find_package(InnoSetup)
if(INNOSETUP_EXECUTABLE)
configure_file(dist/setup.iss.in "${CMAKE_CURRENT_BINARY_DIR}/setup.iss")
add_custom_target(exe
COMMAND "${INNOSETUP_EXECUTABLE}"
/Q
/DTARGET_FILE_NAME="$<TARGET_FILE_NAME:nitroshare>"
"${CMAKE_CURRENT_BINARY_DIR}/setup.iss"
DEPENDS nitroshare
COMMENT "Building installer..."
)
endif()
endif()
if(APPLE)
# If QHttpEngine was used, copy the dynlib over and correct its RPATH
if(QHttpEngine_FOUND)
add_custom_command(TARGET nitroshare POST_BUILD
COMMAND "${CMAKE_COMMAND}" -E
make_directory "$<TARGET_FILE_DIR:nitroshare>/../Frameworks"
COMMAND "${CMAKE_COMMAND}" -E
copy_if_different
"$<TARGET_FILE:QHttpEngine>"
"$<TARGET_FILE_DIR:nitroshare>/../Frameworks/$<TARGET_SONAME_FILE_NAME:QHttpEngine>"
COMMAND install_name_tool
-change
"$<TARGET_SONAME_FILE_NAME:QHttpEngine>"
"@rpath/$<TARGET_SONAME_FILE_NAME:QHttpEngine>"
"$<TARGET_FILE:nitroshare>"
COMMENT "Copying QHttpEngine and correcting RPATH..."
)
endif()
# If macdeployqt is available, use it immediately after the build completes to
# copy the Qt frameworks into the application bundle.
include(DeployQt)
if(MACDEPLOYQT_EXECUTABLE)
macdeployqt(nitroshare)
endif()
# Create a target for building a DMG that contains the application bundle and a
# symlink to the /Applications folder.
set(sym "${CMAKE_BINARY_DIR}/out/Applications")
set(dmg "${CMAKE_BINARY_DIR}/nitroshare-${PROJECT_VERSION}-osx.dmg")
add_custom_target(dmg
COMMAND rm -f "${sym}" "${dmg}"
COMMAND ln -s /Applications "${sym}"
COMMAND hdiutil create
-srcfolder "${CMAKE_BINARY_DIR}/out"
-volname "${PROJECT_NAME}"
-fs HFS+
-size 30m
"${dmg}"
DEPENDS nitroshare
COMMENT "Building disk image..."
)
endif()
# On Linux, include the icons, manpage, .desktop file, and file manager extensions when installing.
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
install(DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}/dist/icons"
DESTINATION "${CMAKE_INSTALL_DATAROOTDIR}"
)
install(FILES "${CMAKE_CURRENT_SOURCE_DIR}/dist/nitroshare.1"
DESTINATION "${CMAKE_INSTALL_MANDIR}/man1"
)
install(FILES "${CMAKE_CURRENT_SOURCE_DIR}/dist/nitroshare.desktop"
DESTINATION "${CMAKE_INSTALL_DATAROOTDIR}/applications"
)
# Configure and install Python extensions for Nautilus-derived file managers
foreach(_file_manager Nautilus Nemo Caja)
string(TOLOWER ${_file_manager} _file_manager_lower)
set(_py_filename "${CMAKE_CURRENT_BINARY_DIR}/dist/nitroshare_${_file_manager_lower}.py")
configure_file("${CMAKE_CURRENT_SOURCE_DIR}/dist/nitroshare.py.in" "${_py_filename}")
install(FILES "${_py_filename}"
DESTINATION "${CMAKE_INSTALL_DATAROOTDIR}/${_file_manager_lower}-python/extensions"
RENAME nitroshare.py
)
endforeach()
endif()
谁能告诉我它的解决方案？
阅读： https://stackoverflow.com/questions/25875255/cmake-qt5-qt5-wrap-ui-not-generating-ui-header-files – eyllanesc
它没有解决我的问题 –
是的我已经安装qt5 qtbase5-dev qtbase5- private-dev qtbase5-dev-tools。 –