在我的C++编程类中,我负责为5名员工创建工资记录器。其中一个要求是没有全局变量,因此我认为这需要我在每个单独的函数中局部声明变量并将它们传递给它们。我知道错误意味着什么,但我不知道如何实施解决方案,请帮助。我甚至不确定是否通过引用传递/按值传递甚至对参数有意义,但由于关于doCalculations(),displayPayrollSummaryResults()和displayEmployeeResults()中有3个参数的3个错误, ()。这里是我有的doCalculations()。C++编程非常新 - C++函数不需要0个参数
在调用getInput之前还有另外一个函数,其中我接收用户输入的empID,payrollType ....并将它们放入payrollArray。数组的其余部分用于存储此函数的计算数据。并在之后添加更多功能来显示结果(请参阅最后的完整代码)。
void doCalculations(
double payrollArray[12][5],
int &empID,
char &payrollType,
double &hoursWorked,
double &payRate,
int &unionCode
)
{
// Defeind Variables - Calculations
int totalEmployee;
double totalGrossPay;
double totalNetPay;
double highestGrossPay;
double lowestGrossPay;
double idHighestGrossPay;
double idLowestGrossPay;
double averageGrossPay;
double averageNetPay;
// - Pay Calucations
double regularPay;
double overtimePay;
double grossPay;
// - Tax Calculations
double stateTax;
double federalTax;
double totalTax;
// - Union Dues
double unionDues;
// - Net Pay
double netPay;
//Pay Calucations - Work more than 40 hours
if(hoursWorked > 40){
regularPay = payRate * 40;
overtimePay = (1.5 * payRate) * (hoursWorked - 40);
grossPay = regularPay + overtimePay;
}
//Pay Calucations - Work less than 40 hours
else{
regularPay = payRate * hoursWorked;
overtimePay = 0;
grossPay = regularPay;
}
//Put pay calcuations into array
payrollArray[4][totalEmployee] = regularPay;
payrollArray[5][totalEmployee] = overtimePay;
payrollArray[6][totalEmployee] = grossPay;
//Taxes Calculations
// State Tax Calculations
if(grossPay < 500)
stateTax = 0;
else if (grossPay >= 500 && grossPay <= 1000)
stateTax = grossPay * 0.03;
else if (grossPay > 1000)
stateTax = grossPay * 0.05;
// Federal Tax Calculations
if(grossPay < 500)
federalTax = 0;
else if (grossPay >= 500 && grossPay <= 1000)
federalTax = grossPay * 0.05;
else if (grossPay > 1000)
federalTax = grossPay * 0.07;
totalTax = stateTax + federalTax;
// Put Taxes into array
payrollArray[7][totalEmployee] = stateTax;
payrollArray[8][totalEmployee] = federalTax;
payrollArray[9][totalEmployee] = totalTax;
// Define Variables - Union dues
if (unionCode = 1)
unionDues = 15.00;
else if (unionCode = 2)
unionDues = 25.00;
else if (unionCode = 3)
unionDues = 35.00;
// Net Pay Calculation
netPay = grossPay - totalTax - unionDues;
// Put unionDues & netPay into array
payrollArray[10][totalEmployee] = unionDues;
payrollArray[11][totalEmployee] = netPay;
// Add 1 to totalEmployee per calculation
totalEmployee += 1;
// Perpetual Summary Data Calculation
// Total Gross Pay (Category 6)
for (int i = 0; i < totalEmployee; ++i)
totalGrossPay += payrollArray[6][i];
// Total Net Pay (Category 11)
for (int i = 0; i < totalEmployee; ++i)
totalNetPay += payrollArray[11][i];
// Find Employee ID number of highest gross pay
// Compare and Find higest gross pay
highestGrossPay = 0; // assume highest gross pay is 0 for now
for (int grossPay = 0; grossPay < totalEmployee; ++grossPay)
{
if (payrollArray[6][grossPay] > highestGrossPay)
highestGrossPay = payrollArray[6][grossPay]; // new highestGrossPay, gross pay field is at 6.
}
// Using highest gross pay to find corresponding employee ID
for (int id = 0; id < totalEmployee; ++ id)
{
if (payrollArray[6][id] == highestGrossPay)
idHighestGrossPay = payrollArray[0][id]; // the empID field is at 0,
}
// Find Employee ID number of lowest gross pay
// Compare and Find lowest gross pay
lowestGrossPay = 3150; // assume lowest gross pay is maximum of 3150 for now
for (int grossPay = 0; grossPay < totalEmployee; ++grossPay)
{
if (payrollArray[6][grossPay] < lowestGrossPay)
lowestGrossPay = payrollArray[6][grossPay]; // new lowestGrossPay, gross pay field is at 6.
}
// Using highest gross pay to find corresponding employee ID
for (int id = 0; id < totalEmployee; ++ id)
{
if (payrollArray[6][id] == lowestGrossPay)
idLowestGrossPay = payrollArray[0][id]; // the empID field is at 0,
}
// Average Gross Pay
averageGrossPay = totalGrossPay/totalEmployee;
// Average Net Pay
averageNetPay = totalNetPay/totalEmployee;
}
在main()做什么用newPayroll.doCalculations( “放什么在这里吗?”),我只是去通过试验&误差将(双payrollArray [12] [5],诠释& empID ....),不完全保留C++课程的构造函数或函数原型,也许我缺少一些代码块?感谢您的帮助。
int main()
{
// Introduction Message
cout << "WELCOME - EMPLOYEE PAYROLL RECORDER" << endl;
cout << endl;
Payroll newPayroll;
int employeeLimit = 0; // Employee limit counter
char addEmployee = 'y';// Initial Yes on Add Employee
do{
newPayroll.getInput();
newPayroll.doCalculations();
cout << "Would you want to continue adding employees? Enter [Y] or [y] for Yes." << endl;
cout << "Otherwise Press Any Other Character to Stop adding more Records" << endl;
cin >> addEmployee;
++employeeLimit;
}while((addEmployee == 'y' || addEmployee == 'Y') && employeeLimit < 5);
cout << endl; // blank line separator
newPayroll.displayEmployeeResults();
cout << endl; // blank line separator
newPayroll.displayPayrollSummaryResults();
cout << endl; // blank line separator
system("PAUSE");
return 0;
}
下面是程序的完整代码:谢谢,请帮助。
#include "stdafx.h"
#include <iostream>
#include <iomanip>
using namespace std;
// Payroll class definition
class Payroll
{
public:
/* getInput(), Function to accept and validates data, stores valid input data in arrays */
void getInput()
{
int empID;
char payrollType;
double hoursWorked;
double payRate;
int unionCode;
int totalEmployee;
double payrollArray[12][5]; // Initialize a 12 rows 5 coloums array for storing payroll data.
char payrollTypeArray[1][5]; // Initialize a separate array for storing payrollType char data.
cout << "Please Enter Employee ID: " << endl;
cin >> empID;
while(empID < 100 || empID > 800){
cout << "The Employee ID Entered is Invalid, Please Enter Employee ID (100 - 800): " << endl;
cin >> empID;
}
//put employee id into array
payrollArray[0][totalEmployee] = empID;
cout << "Please Enter payroll type: " << endl;
cin >> payrollType;
while(payrollType != 'H' && payrollType != 'h'){
cout << "The Payroll Type Entered is Invalid, Please Enter Payroll Type (H or h): " << endl;
cin >> payrollType;
}
//put payrollType into array
payrollTypeArray[1][totalEmployee] = payrollType;
cout << "Please Enter Hours Worked: " << endl;
cin >> hoursWorked;
while(hoursWorked < 0 || hoursWorked > 60.0){
cout << "The Hours Worked Entered is Invalid, Please Enter Hours Worked (0 - 60): " << endl;
cin >> hoursWorked;
}
//put hoursWorked into array
payrollArray[2][totalEmployee] = hoursWorked;
cout << "Please Enter Pay Rate: " << endl;
cin >> payRate;
while(payRate < 8.50 || payRate > 45.00){
cout << "The Hourly Pay Rate Entered is Invalid, Please Enter Pay Rate (8.50 - 45.00): " << endl;
cin >> payRate;
}
//put payRate into array
payrollArray[3][totalEmployee] = payRate;
cout << "Please Enter Union Code: " << endl;
cin >> unionCode;
while(unionCode !=1 && unionCode !=2 && unionCode !=3){
cout << "The Union Code Entered is Invalid, Please Enter Union Code (1, 2 or 3): " << endl;
cin >> unionCode;
}
}
/* doCalculations(), performs calculations using data sotred in input arrays, store
calculation results in arrays, and accumulates totals */
void doCalculations(
double payrollArray[12][5],
int &empID,
char &payrollType,
double &hoursWorked,
double &payRate,
int &unionCode
)
{
// Defeind Variables - Calculations
int totalEmployee;
double totalGrossPay;
double totalNetPay;
double highestGrossPay;
double lowestGrossPay;
double idHighestGrossPay;
double idLowestGrossPay;
double averageGrossPay;
double averageNetPay;
// - Pay Calucations
double regularPay;
double overtimePay;
double grossPay;
// - Tax Calculations
double stateTax;
double federalTax;
double totalTax;
// - Union Dues
double unionDues;
// - Net Pay
double netPay;
//Pay Calucations - Work more than 40 hours
if(hoursWorked > 40){
regularPay = payRate * 40;
overtimePay = (1.5 * payRate) * (hoursWorked - 40);
grossPay = regularPay + overtimePay;
}
//Pay Calucations - Work less than 40 hours
else{
regularPay = payRate * hoursWorked;
overtimePay = 0;
grossPay = regularPay;
}
//Put pay calcuations into array
payrollArray[4][totalEmployee] = regularPay;
payrollArray[5][totalEmployee] = overtimePay;
payrollArray[6][totalEmployee] = grossPay;
//Taxes Calculations
// State Tax Calculations
if(grossPay < 500)
stateTax = 0;
else if (grossPay >= 500 && grossPay <= 1000)
stateTax = grossPay * 0.03;
else if (grossPay > 1000)
stateTax = grossPay * 0.05;
// Federal Tax Calculations
if(grossPay < 500)
federalTax = 0;
else if (grossPay >= 500 && grossPay <= 1000)
federalTax = grossPay * 0.05;
else if (grossPay > 1000)
federalTax = grossPay * 0.07;
totalTax = stateTax + federalTax;
// Put Taxes into array
payrollArray[7][totalEmployee] = stateTax;
payrollArray[8][totalEmployee] = federalTax;
payrollArray[9][totalEmployee] = totalTax;
// Define Variables - Union dues
if (unionCode = 1)
unionDues = 15.00;
else if (unionCode = 2)
unionDues = 25.00;
else if (unionCode = 3)
unionDues = 35.00;
// Net Pay Calculation
netPay = grossPay - totalTax - unionDues;
// Put unionDues & netPay into array
payrollArray[10][totalEmployee] = unionDues;
payrollArray[11][totalEmployee] = netPay;
// Add 1 to totalEmployee per calculation
totalEmployee += 1;
// Perpetual Summary Data Calculation
// Total Gross Pay (Category 6)
for (int i = 0; i < totalEmployee; ++i)
totalGrossPay += payrollArray[6][i];
// Total Net Pay (Category 11)
for (int i = 0; i < totalEmployee; ++i)
totalNetPay += payrollArray[11][i];
// Find Employee ID number of highest gross pay
// Compare and Find higest gross pay
highestGrossPay = 0; // assume highest gross pay is 0 for now
for (int grossPay = 0; grossPay < totalEmployee; ++grossPay)
{
if (payrollArray[6][grossPay] > highestGrossPay)
highestGrossPay = payrollArray[6][grossPay]; // new highestGrossPay, gross pay field is at 6.
}
// Using highest gross pay to find corresponding employee ID
for (int id = 0; id < totalEmployee; ++ id)
{
if (payrollArray[6][id] == highestGrossPay)
idHighestGrossPay = payrollArray[0][id]; // the empID field is at 0,
}
// Find Employee ID number of lowest gross pay
// Compare and Find lowest gross pay
lowestGrossPay = 3150; // assume lowest gross pay is maximum of 3150 for now
for (int grossPay = 0; grossPay < totalEmployee; ++grossPay)
{
if (payrollArray[6][grossPay] < lowestGrossPay)
lowestGrossPay = payrollArray[6][grossPay]; // new lowestGrossPay, gross pay field is at 6.
}
// Using highest gross pay to find corresponding employee ID
for (int id = 0; id < totalEmployee; ++ id)
{
if (payrollArray[6][id] == lowestGrossPay)
idLowestGrossPay = payrollArray[0][id]; // the empID field is at 0,
}
// Average Gross Pay
averageGrossPay = totalGrossPay/totalEmployee;
// Average Net Pay
averageNetPay = totalNetPay/totalEmployee;
}
/* displayEmployeeResults(), displays employee IDs and calculations results that are stored in arrays.*/
void displayEmployeeResults(
double payrollArray[12][5],
char payrollTypeArray[1][5],
int &totalEmployee
)
{
int employeeCount;
int arrayDataSetw = 5;
int arrayTitleSetw = 12;
//Display Data Array
cout << setw(50) <<"Individual Employee Payroll Record" << endl;
cout << endl;
// Employee ID title
cout << setw(arrayTitleSetw) << "Employee ID";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << payrollArray[0][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Payroll Type title
cout << setw(arrayTitleSetw) << "Payroll Type";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << payrollTypeArray[1][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Hours Worked title
cout << setw(arrayTitleSetw) << "Hours Worked";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << payrollArray[2][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Pay Rate title
cout << setw(arrayTitleSetw) << "Pay Rate";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[3][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Regular Pay title
cout << setw(arrayTitleSetw) << "Regular Pay";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[4][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Overtime Pay title
cout << setw(arrayTitleSetw) << "Overtime Pay";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[5][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Gross Pay title
cout << setw(arrayTitleSetw) << "Gross Pay";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[6][employeeCount] << setw(arrayDataSetw);
cout << endl;
// State Tax title
cout << setw(arrayTitleSetw) << "State Tax";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[7][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Federal Tax title
cout << setw(arrayTitleSetw) << "Federal Tax";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[8][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Total Tax title
cout << setw(arrayTitleSetw) << "Total Tax";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[9][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Union Dues title
cout << setw(arrayTitleSetw) << "Union Dues";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[10][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Net Pay title
cout << setw(arrayTitleSetw) << "Net Pay";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[11][employeeCount] << setw(arrayDataSetw);
cout << endl;
}
/* displayPayrollSummaryResults(), displays summary totals and averages */
void displayPayrollSummaryResults(
int &totalEmployee,
double &totalGrossPay,
double &totalNetPay,
double &idHighestGrossPay,
double &highestGrossPay,
double &idLowestGrossPay,
double &lowestGrossPay,
double &averageGrossPay,
double &averageNetPay
)
{
int summaryDataSetw = 47;
// Display Summary Data
cout << setw(50) <<"Employee Payroll Summary" << endl;
cout << endl;
cout << setw(summaryDataSetw) << "Total Number of Employees on record is: " << totalEmployee << endl;
cout << setw(summaryDataSetw) << "Total Gross Pay is: $" << totalGrossPay << endl;
cout << setw(summaryDataSetw) << "Total Net Pay is: $" << totalNetPay << endl;
cout << setw(summaryDataSetw) << "Employee with the highest gross pay: Employee #" << idHighestGrossPay << " earned $" << highestGrossPay << endl;
cout << setw(summaryDataSetw) << "Employee with the lowest gross pay: Employee #" << idLowestGrossPay << " earned $" << lowestGrossPay << endl;
cout << setw(summaryDataSetw) << "Average gross pay is: $" << averageGrossPay << endl;
cout << setw(summaryDataSetw) << "Average net pay is: $" << averageNetPay << endl;
}
};
int main()
{
// Introduction Message
cout << "WELCOME - EMPLOYEE PAYROLL RECORDER" << endl;
cout << endl;
Payroll newPayroll;
int employeeLimit = 0; // Employee limit counter
char addEmployee = 'y';// Initial Yes on Add Employee
do{
newPayroll.getInput();
newPayroll.doCalculations();
cout << "Would you want to continue adding employees? Enter [Y] or [y] for Yes." << endl;
cout << "Otherwise Press Any Other Character to Stop adding more Records" << endl;
cin >> addEmployee;
++employeeLimit;
}while((addEmployee == 'y' || addEmployee == 'Y') && employeeLimit < 5);
cout << endl; // blank line separator
newPayroll.displayEmployeeResults();
cout << endl; // blank line separator
newPayroll.displayPayrollSummaryResults();
cout << endl; // blank line separator
system("PAUSE");
return 0;
}
你有一本书,从你的班学习? – 2012-04-18 06:03:55
这是很多代码。我建议你提供一个简短的例子来说明你的问题。 – juanchopanza 2012-04-18 06:08:46
你,先生,缺少一些基本概念。我建议你简单看看函数和方法是如何工作的。 – ScarletAmaranth 2012-04-18 06:10:03