0
我使用了一个FOR/F循环读取存储在一个文件中的值，（内容是在我原来的职位的底部）和存储参数变量需要一些帮助使用count + 1即时生成，这样可以使用的参数的数量是开放式的（因为预期的用途是将共享安装到驱动器字母，可以有任意数量的驱动器和参数）。使用“如果”批处理与变量和字符串
所有使用必须匹配和由脚本是已知的参数，每个参数具有相关联的设置。一个例子是我在我的文件中定义的第一个参数是（Mode），它的设置是（LAN）。 For/f循环（其中两个）与写入配置文件的方式一起写入的方式将使用var！count将所有使用的参数分配给一个（var＃）编号！并且相关设置将被分配给（avar＃）。
但是，由于参数可以以任何顺序列出，唯一的要求是关联的设置位于同一行，并且在其分隔符后面，附加到var/avar的数字仅用于确保所有内容都存储在独特的变量。
然后我尝试使用“如果”存储在任何VAR＃环路工作的参数相匹配，有用的项目如
var1 = Mode avar1=LAN as set by the For /f loop
if var!count!==Mode (SET Mode=avar!count!)
应该有希望匹配VAR1已知值有参数模式存储在里面，所以在这种情况下，应将模式变量设置为存储在avar1（Lan）中的任何值（var1与avar1一起，var2与avar2一起，等等等等）
问题是，如果陈述从未评估为真。简化的代码示例如下，我甚至进行测试的目的，手动设置VAR1接近顶部，即使是应该由FOR/F回路来完成，它仍然没有评估为真
setlocal EnableDelayedExpansion
@echo off
SET count=1
FOR /f "eol=; skip=18 tokens=2 delims=#@" %%x in (C:\OConf.ini) DO (
SET var!count!=%%x
SET /a count=!count!+1
echo value 1 is %%x
)
SET count=1
FOR /f "eol=; skip=18 tokens=2 [email protected]" %%x in (C:\OConf.ini) DO (
SET avar!count!=%%x
SET /a count=!count!+1
echo value 2 is %%x
)
SET var1 == Mode
:SetCounters
SET /a count=1
:SetVars
echo test var!count!
IF NOT DEFINED var!count! (GOTO CleanOne)
if var!count! == Mode (Echo If this is seen then the "if" evaluated as true)
Echo The value of var1 equals (%var1%)
goto EOF
:CleanOne
Echo If you see this then var!count! is null
:EOF
Echo EOF2
对于那些提到EOF的人来说，我认为它不需要标签就可以作为函数的结尾，但至少有一次我运行它，它似乎并没有工作（尽管它可能是IF语句不合格地失败已经发生过几次））
======================================= ====================
更复杂的原始p下面，根据一些建议，我简化并澄清了我的问题，这已被编辑到上面。
============================================== =============
我创建一个视窗经由winbuilder 10 PE溶液，最终希望对将其从至少3种方法（直接从闪存驱动器一个用于/ DVD，通过名为easy2boot的实用程序进行多重引导，并从网络引导PXE）。不过，我实现的大部分功能都需要一些额外的文件才能在驱动器盘符Y处访问：但取决于您如何启动，这可能意味着挂载图像文件，挂载网络共享，或者只是读取启动的闪存驱动器或dvd从。
因此我写在开机时加载外壳之前运行的脚本。它所做的第一件事就是检查每个驱动器的根目录是否有配置文件，如果可用，它可以进入城镇，如果不可用，则会提示用户回答一些问题并从那里开始。
我一直在写什么，我会称之为'简单的脚本'多年，这种静态和线性的运行方式，这是我第一次真正尝试我将称为'动态脚本'具有模块化的子程序和循环，所有的路径将是相对的，或者用户提示，但不是硬编码的。
我已经为它自己编写的主脚本很好地适用于现在大部分完成的LAN子程序和回声很适合E2B和Flash子例程的占位符文本。
我目前正在研究检查配置文件的子程序，并运行该用户输入。我认为一切都进展良好在脚本顶部空间忘记测试一段时间...
...当我测试时，我发现我使用的“IF”语句从来没有评估为真，甚至如果我手动设置变量并且知道它是匹配的。我尝试了所有可以用引号思考的排列方式，没有百分比和感叹号，空格，没有空格和不同的放置可能性......谷歌搜索和谷歌搜索，我在这里找到的一篇文章似乎应该有效，但我没有试过从它的工作，但它激励我问这里！
以下是开发简单的硬编码，以便在我的驱动器根目录中查找配置文件，我计划将此放入的主脚本有一个“if exists”循环，它循环遍历所有驱动器号以查找它在任何驱动器上。我还对这个剧本进行了评论，不仅解释了什么是什么，而且还说明了我在哪里遇到了麻烦。我还评论了一些重复的事情，这些是我的实验结果，以使其发挥作用。现在的脚本会读取预期的值并将它们分配给递增的变量，并将它们回显以显示其工作，但在尝试确定已读取的内容并将其分配给要用于做的东西发生
setlocal EnableDelayedExpansion
@echo off
::sets the primary counter for the "For" Loop
SET count=1
:: FOR loop to set varibles for the descriptive name of the setting to be
adjusted for use in
:: determining what the setting value is to adjust
FOR /f "eol=; skip=18 tokens=2 delims=#@" %%x in (C:\OConf.ini) DO (
SET var!count!=%%x
SET /a count=!count!+1
echo value 1 is %%x
)
::sets the primary counter for the "For" Loop
SET count=1
::FOR loop to determine the setting values that go with each descriptive Name
FOR /f "eol=; skip=18 tokens=2 [email protected]" %%x in (C:\OConf.ini) DO (
SET avar!count!=%%x
SET /a count=!count!+1
echo value 2 is %%x
)
:MyLabel
::diagnostic code to reference what value is being stored
echo this is var1: %var1%
echo this is avar1: %avar1%
echo this is var2: %var2%
echo this is avar2: %avar2%
echo this is var3: %var3%
echo this is avar3: %avar3%
echo this is var4: %var4%
echo this is avar4: %avar4%
echo this is var5: %var5%
echo this is avar5: %avar5%
echo this is var6: %var6%
echo this is avar6: %avar6%
echo this is var7: %var7%
echo this is avar7: %avar7%
echo this is var8: %var8%
echo this is avar8: %avar8%
echo this is var9: %var9%
echo this is avar9: %avar9%
echo this is var10: %var10%
echo this is avar10: %avar10%
echo this is var11: %var11%
echo this is avar11: %avar11%
echo this is var12: %var12%
echo this is avar12: %avar12%
::echo this is avar1: %avar1%
::echo this is avar2: %avar2%
::echo this is avar3: %avar3%
::echo this is avar4: %avar4%
::echo this is avar5: %avar5%
::echo this is avar6: %avar6%
::echo this is avar7: %avar7%
::echo this is avar8: %avar8%
::echo this is avar9: %avar9%
::echo this is avar10: %avar10%
::echo this is avar11: %avar11%
::echo this is avar12: %avar12%
::in my sample script I am testing against var/avar is known to be null this is test code
echo this is avar13: %avar13% test
::this code is to show me what part of the script has or has not executed
echo this is not final
:SetCounters
::Set primary counter for script advancement
SET /a count=1
::Set drive letter counter so it can be compared to the share counter
SET /a D=1
::Set network share counter so it can be compared to the drive letter counter
SET /a S=1
:SetVars
::Subrotine to fill in variables for use in the up coming action subrutines
::Diagnostic line added when things were not working right
echo test var!count! D is %D% S is %S%
::escape subrutine so when all values have been filled in, this loop ends and goes to use
IF NOT DEFINED var!count! (GOTO CleanOne)
:: This is the heavy lifting of this subrutine (also currently non functional for unknown reasons)
:: If bank compares the value of var# (where # is a counter set number) to known valid values, when
:: the valid value is found to match, its associated setting held in avar# is to the batch varible
:: of the same name. Commented out code is either non functional or untest but a new approach concocted
:: before testing, but the need to return to it may come up so not removed. denoted as not part of
:: this description by adding a preceeding astrik
:: ========================================================================================
:: Mode is the first test & despite everything I have tried will not evaluate to true
:: tried multiple iterations of including quotes (or not), exclamations and percents symbols
:: around the varibles different ways "var!count!" var!count! %var%!count!
%var!count!% !var!!count! !var!count!!
:: and a bunch of others, similar iterations around mode, tried spaces and no spaces next to the equal symbols
:: also tried reversing the order of the comparison... *******HELP*******
::*if "%var%!count!" == "Mode" (Set Mode=avar2 echo test mode %Mode%)
:: Next line is bastardized to simply see when the expression evaluates to true
:: if Mode == !var!!count! (Echo Equal)
:: next commented out command is supposed to remove quotes if present to prevent issues, will return to this
:: concept once the issue with the IF statements is dealt with
::*SET Mode=%avar!count!:"=%
:: also a diagnostic command
::*echo test mode %Mode%
::=======================================================
:: lines between here and the next divider for me have been temporarily cut to another file to reduce clutter
:: and save my sanity while I takle the problem. pasted back to demonstraight intended functionality.
:: Mode has 3 valid options currently, Flash/DVD, LAN, E2B and will be used to either mount a image file on a E2B
:: drive to a drive letter, or to mount (possibly multiple) network shares to drive letters
if var!count!==Mode (SET Mode=avar!count!)
::if var!count!==Mode (SET Mode=%avar!count!:"=%)
:: Perf is short for performance and is to determine if the install driver packs subroutine should run to increase performance
:: and or recognize otherwise unknown devices, declining this uses only baked in drivers. Valid options are Yes/No
if var!count!==Perf (Set Perf=avar!count!)
::if var!count!==Perf (SET Perf=%avar!count!:"=%)
:: ImgPth is for the image path to be mounted to the Y:, currently it is only intended that 1 image be mounted however
:: as I write this I realize the way I am approaching mounting network shares could allow multiple images to be added also
if var!count!==ImgPth (Set ImgPth=avar!count!)
::if var!count!==ImgPth (SET ImgPth=%avar!count!:"=%)
:: NumDrv is supposed to be how many network shares were to be mounted so the script could allocate enough varibles
:: I have sense adopted a new approach that can auto-detect and just run, haven't removed yet
if var!count!==NumDrv (Set NumDrv=avar!count!)
::if var!count!==NumDrv (SET NumDrv=%avar!count!:"=%)
:: Server is used to name the server that has the network share on it that will get mounted to a drive letter
:: the tools used only support one server connection via one user name, so this can only be set once.
:: eg \\server01\something\share would translate to server01 (no need for slashes)
if var!count!==Server (Set Server=avar!count!)
::if var!count!==Server (SET Server=%avar!count!:"=%)
:: Usr is the user name to authenticate with the server to access the network share
:: the tools used only support one server connection via one user name, so this can only be set once.
if var!count!==Usr (Set Usr=avar!count!)
::if var!count!==Usr (SET Usr=%avar!count!:"=%)
::Pass is the password to use in authenticating with the server
:: the tools used only support one server connection via one user name, so this can only be set once.
if var!count!==Pass (Set Pass=avar!count!)
::if var!count!==Pass (SET Pass=%avar!count!:"=%)
::DrvLtr denotes what drive letter you want the network share mounted to. X: will already be in use by the system
:: if using on a computer with windows installed on local HDD then C: will be in use. If newer windows with recovery
:: partitions and or otherwise multiple drives/partitions D: E: will also likely be in use. Y: is a special case and
:: ultimatly the point of this entire script. Core files to boot and opperate are loaded to the X: ram disk, however
:: to save RAM and increase compatibility additional functionality that requires additional files not stored in the
:: ramdisk need to be mounted to Y: and Y: is reserved for this use only. So do not use C: D: E: X: (Y: unless its for
:: the specified files)
if var!count!==DrvLtr (
Set DrvLtr!DL!=avar!count!
::Set DrvLtr!DL!=%avar!count!:"=%
::Next bit was intended to be a diagnostic message, alas the test never got that far
Echo DrvLtr Subroutine has run for the !DL! time and stored %DrvLtr%!DL! for use
:: the counter being modified below allows for it to be determined how many times this subroutine has run
:: by the time this loop exits it should match the number of times the Share routine has run, if it doesn't
:: then there is an error, but by taking the smaller number and running the mount share command only the
:: lessar times it can be assured each share has a drive letter and vice versa
SET /a DL=!DL!+1
)
:: path to the network Share, multiple of these can be mounted to different drive letters
:: eg \\server01\something\share would translate to something\share, or if the share isnt in a sub folder
:: eg \\server01\share then it would translate to just share (slashes only used if more then one folder deep)
if var!count!==Share (
Set Share!SH!=avar!count!
::Set DrvLtr!SH!=%avar!count!:"=%
Echo DrvLtr Subrutine has run for the !SH! time and stored %DrvLtr%!SH! for use
:: the counter being modified below allows for it to be determined how many times this subroutine has run
:: by the time this loop exits it should match the number of times the Share routine has run, if it doesn't
:: then there is an error, but by taking the smaller number and running the mount share command only the
:: lessar times it can be assured each share has a drive letter and vice versa
SET /a SH=!SH!+1
)
:: advances the main counter so the next pass through the loop doesn't use the same variable and thus the same information
SET /a count=!count!+1
:: its commented out for troubleshooting but this goto is to repeat the loop
::goto :SetVars
pause
:: the above if statements currently are nonfunctional, the below is my first draft at takling the idea of mounting multiple network shares
:: before realizing the approach had some limitations in how drive letters and their respective shares could be listed in the config file
:: originally intended that the config file would list either the letter then the share, next letter next share, or possibly share then letter
:: this code was then tweaked so the config file could accept letter, share, share, letter, letter, share; however having more then two letters
:: and or shares in sequence would conceptially (I never tested this code) break the code, and a bathroom break brainstorm would clue me into
:: much simpler code that shouldnt care how the drive letters and shares are listed as long as there are equal numbers of them, and if theres not
:: a still useable fail can be acheved by using the lower number of how many shares listed vs drive letters
REM attempting subroutine rewrite to be completly agnostic to drive verses share ordering, commented out subroutine in case
REM I fail and or I need to use parts of this
REM #(if sh) commented out as more versitile and similar functionality provided by adding another counter advance near the end
REM #this should allow the drive letters or shares to be listed back to back and still be set as long as its still grouped to
REM #one side or the other with its other value (S= share D= Drive: DSDSDS was the original plan, DSSDDS or SDDSSD would be prevented
REM #by this method but would work with the counter advance)
::if var!count!==DrvLtr (
REM Checking for drive letter option
::if SH==0 ( REM checking if share has already been set this plus next option prevents a required order of things, though the options must be set together
::Set DrvLtr=avar!count! REM Sets the Drive Letter value
::SET /a count=!count!+1 REM If share hasnt been set, advances the counter so the share can be set
::if var!count!==Share (Set Share=avar!count! REM sets the share
::Set /p DL=1 REM notates that the share has been set so the next subroutine wont muck things up trying to do the same thing
::echo DrvLtr Subrutine has run varibles are %DrvLtr% and %Share% REM Diagnostic message to know if this subrutine ran and if so did it set correctly
::SET /a count=!count!+1 REM advances the counter so presumably the share subrutine wont run as it was set here
::)
::else (Echo Share set errored)
::)
:CleanOne
:: makes sure the number of drive letters requested matches the number of shares being mounted or if not uses the lesser number
Set /a Dnum=!DL!
set /a Snum=!SH!
If %Dnum% LEQ %Snum% set /a RC=%Dnum%
If %Snum% LEQ %Dnum% set /a RC=%Snum%
goto :CleanTwo
:CleanTwo
REM to modify later, currently echoing to test current script operation
:: this is when I decided to test and discovered the broken IF statements
:: this subroutine was conceptualized and removing all quotes that maybe stored in variables, however before writing something to do that
:: I found sample code that could do that on the fly and wrote it into the if statements, sense being commented out as I tackle why the IF's are broken
Echo Mode equals %Mode%
Echo Perf equals %Perf%
Echo NumDrv equals %NumDrv%
Echo Server equals %Server%
Echo Usr equals %Usr%
Echo Pass equals %Pass%
Echo DrvLtr equals %DrvLtr%
Echo Share equals %Share%
Echo DrvLtr2 equals %DrvLtr2%
Echo Share2 equals %Share2%
Echo DrvLtr3 equals %DrvLtr3%
Echo Share3 equals %Share3%
:: after making sure nothing is muddled with quotes, and maybe slashes, and likely inserting some code above the SetVars rutine to set all to either upper/lower
:: case to prevent issue, the assigned variables will be used.
:: Flash/dvd will simply ask for the performance option and look for a DriverPacks and install them
:: if performance mode is desired.
:: E2B, is for use with Easy2Boot using a .imgptn file which gets mapped to the MBR of the flash drive (it's a compatibility hack for uefi)
:: easy2boot supports other image files but the functionality of automatically unmounting, and remapping to a drive letter are automatically done with baked in options,
:: plus access to the E2B drive proper is never lost, with .imgptn being mapped to the drive via the MBR all access to the main drive is lost until you run a script
:: provided the developer to restore the MBR to its original state. E2B mode in this script is intended to call that script (well a bastardized version that doesnt need
:: user input, via loops and auto detection (upcoming, my previous version I tweaked for my PE3 build years ago, was hard coded for set options that were true about 90% time,
:: everything about this project as opposed to my old project is to be modular, relative, and dynamic so hard coding things esp things that dont work all the time are an antithesis)
:: Once the script is run to restore the original MBR and primary drive access is restored, the image "path\file" stored in ImgPth will be mounted to the Y: using imdisk.
:: Lan is intended for PXE boot situations and will mount a network share that contains the files needed for Y: to that drive letter, and additionally any extra shares indicated
:: performance mode will then run or not as specified, followed by starting the shell
:MyLabel
:: Original placment of this diagnostic readout, some iterations of the broken IF statements prevented the script from completing
:: and this was never seen, and in takling this problem I needed to see if these were set so copied above
echo this is var1: %var1%
echo this is avar1: %avar1%
echo this is var2: %var2%
echo this is avar2: %avar2%
echo this is var3: %var3%
echo this is avar3: %avar3%
echo this is var4: %var4%
echo this is avar4: %avar4%
echo this is var5: %var5%
echo this is avar5: %avar5%
echo this is var6: %var6%
echo this is avar6: %avar6%
echo this is var7: %var7%
echo this is avar7: %avar7%
echo this is var8: %var8%
echo this is avar8: %avar8%
echo this is var9: %var9%
echo this is avar9: %avar9%
echo this is var10: %var10%
echo this is avar10: %avar10%
echo this is var11: %var11%
echo this is avar11: %avar11%
echo this is var12: %var12%
echo this is avar12: %avar12%
::echo this is avar1: %avar1%
::echo this is avar2: %avar2%
::echo this is avar3: %avar3%
::echo this is avar4: %avar4%
::echo this is avar5: %avar5%
::echo this is avar6: %avar6%
::echo this is avar7: %avar7%
::echo this is avar8: %avar8%
::echo this is avar9: %avar9%
::echo this is avar10: %avar10%
::echo this is avar11: %avar11%
::echo this is avar12: %avar12%
echo this is avar13: %avar13% test
echo this is not final
goto test2
:Final
Echo this is final
:EOF
echo done
pause
:: a command I refrenced, from something I used a while back
::SET count=1
::FOR /F "tokens=* USEBACKQ" %%F IN (`Net User %Username%`) DO (
:: SET var!count!=%%F
:: SET /a count=!count!+1
:: SET Shell=Chrome
)
::========================================================
:: Also these are diagnostic commands and subroutines that may share names with some of the above that was
:: temporarily cut out as I takle the problem.
:: Echo %var1% is still var1 right
:: goto EOF
:: :CleanOne
:: Echo CleanOne 13
:: :EOF
:: Echo EOF2
:: commented these out
也可对照，样本配置文件我一直在测试针对如下：
//Mode Declares how the system should mount additional required files, based on how the system was booted
//
//Performance mode Loads drivers either from the Y: or from the E2B flash drive, depending on Mode.
//Performance mode may take plus or minus 5 minutes to fully load, and installs all relevant drivers found in the
//DriverPacks folder in Y: (on Flash/LAN) or on the E2B drive (E2B), For your wait time you get proper performance
//From all your devices, and or visibility if not otherwise recognized, as long as the drivers are in the folder.
//
//Network drive specifies the Server, Share, Login Credentials and the desired Drive letter to mount the share too.
//Y: is reserved for Files required by the Diagnostic Enviornment, LAN requires the first loaded share to contain
//Non-Wim files found in the .iso. Flash/E2B can also mount Network shares but Y: must not be used.
//
//No Slashes are required when entering the network parameters, unless your username requires a domain prefix
//you may only connect to one server, and only use one user to login, however shares are only limited by available
//Drive letters. X: Y: are reserved by the environment, if the computer used has a HDD with windows on it C: will be
//used, if modern windows then there will be additional partitions loaded if they are not hidden.
//Advise not to use B:C:D:E:X:Y:
//==========================================================================
;//(Mode can be: Flash/E2B/LAN)
!#Mode @ LAN
;//(Performance Mode can be: Yes/No)
!#Perf @ No
;//(Network Drive Parameters)
;//(Number of network Shares to mount including Y: if LAN booting)
!#NumDrv @ 3
;//(Server to connect to on LAN)
!#Server @ oc3-omega01
;//(User name to authenticate with the server)
!#Usr @ SomeName
;//(Password to authenticate with the Server)
!#Pass @ SomePassword
;//(Drive letter to assign the first share)
!#DrvLtr @ Y
;//(Share on server to map to drive)
!#Share @ OmegaDR
;//(Repeat DrvLtr and Share lines for as many shares as you are mapping, Do not reuse drive letters)
!#DrvLtr @ Z
!#Share @ Data
!#DrvLtr @ U
!#Share @ "Manual Backups"
我应该说没有什么真正的机密关于这个，因此它可以被共享，当我完成了，是的，它会适合我的目标// //可以动态配置多个用途的图像，但我也是o计划分享它，让winpe项目的其他人受益。
这个项目实际上是各种更新，因为我有一个功能完整的基于PE3（基于win7的）工具集，但是我发现它难以在UEFI系统上看到GUID驱动器。此外，我的PE3图像中使用的脚本是静态的，而且他们大多数时间都在工作，但每隔一段时间他们都不会这样做，因为我在脚本中输入的确切内容与任何随机新机器都不匹配。这次我正在尝试制作一个通用启动脚本。
有一个可怕的很多处理那里看起来应该是一个更简单的问题。也许你可以尝试找到一种方法来在更小的脚本中演示你的问题？即[mcve]。 – 3D1T0R
你期待这段代码做什么：** If var！count！== Mode **。很确定这是你困惑的地方。 – Squashman
这不是我所说的[mcve]！ – aschipfl