当我使用BPF过滤器时，python脚本的CPU利用率

Question

我从here得到了代码。

from binascii import hexlify 
from ctypes import create_string_buffer, addressof 
from socket import socket, AF_PACKET, SOCK_RAW, SOL_SOCKET 
from struct import pack, unpack 

sniff_interval=120 
# A subset of Berkeley Packet Filter constants and macros, as defined in 
# linux/filter.h. 

# Instruction classes 
BPF_LD = 0x00 
BPF_JMP = 0x05 
BPF_RET = 0x06 

# ld/ldx fields 
BPF_H = 0x08 
BPF_B = 0x10 
BPF_ABS = 0x20 

# alu/jmp fields 
BPF_JEQ = 0x10 
BPF_K = 0x00 

def bpf_jump(code, k, jt, jf): 
    return pack('HBBI', code, jt, jf, k) 

def bpf_stmt(code, k): 
    return bpf_jump(code, k, 0, 0) 


# Ordering of the filters is backwards of what would be intuitive for 
# performance reasons: the check that is most likely to fail is first. 
filters_list = [ 
    # Must have dst port 67. Load (BPF_LD) a half word value (BPF_H) in 
    # ethernet frame at absolute byte offset 36 (BPF_ABS). If value is equal to 
    # 67 then do not jump, else jump 5 statements. 
    bpf_stmt(BPF_LD | BPF_H | BPF_ABS, 36), 
    bpf_jump(BPF_JMP | BPF_JEQ | BPF_K, 5201, 0, 5), 

    # Must be UDP (check protocol field at byte offset 23) 
    bpf_stmt(BPF_LD | BPF_B | BPF_ABS, 23), 
    bpf_jump(BPF_JMP | BPF_JEQ | BPF_K, 0x06, 0, 3), 

    # Must be IPv4 (check ethertype field at byte offset 12) 
    bpf_stmt(BPF_LD | BPF_H | BPF_ABS, 12), 
    bpf_jump(BPF_JMP | BPF_JEQ | BPF_K, 0x0800, 0, 1), 

    bpf_stmt(BPF_RET | BPF_K, 0x0fffffff), # pass 
    bpf_stmt(BPF_RET | BPF_K, 0), # reject 
] 

# Create filters struct and fprog struct to be used by SO_ATTACH_FILTER, as 
# defined in linux/filter.h. 
filters = ''.join(filters_list) 
b = create_string_buffer(filters) 
mem_addr_of_filters = addressof(b) 
fprog = pack('HL', len(filters_list), mem_addr_of_filters) 

# As defined in asm/socket.h 
SO_ATTACH_FILTER = 26 

# Create listening socket with filters 
s = socket(AF_PACKET, SOCK_RAW, 0x0800) 
s.setsockopt(SOL_SOCKET, SO_ATTACH_FILTER, fprog) 
s.bind(('eth0', 0x0800)) 

while True: 
    data, addr = s.recvfrom(65565) 
    #print "*****" 
    print 'got data from', addr, ':', hexlify(data) #Have to print data, then only the CPU is 2% 

我与iperf3测试，产生的流量从另一台笔记本电脑通过以太网电缆我的笔记本电脑。在5021上列出的服务器（我的笔记本电脑）和客户端（另一台笔记本电脑）发送数据。

• 如果我评论行print 'got data from', addr, ':', hexlify(data)，并运行该脚本，脚本 的CPU利用率，以同比增长30％，在100MB的流量存在40％。
• 如果我取消注释行print 'got data from', addr, ':', hexlify(data)并再次运行，CPU在下降到2%存在相同的流量。我登记了 htop

那么，这里有什么？

Answer 1

我敢打赌，要么hexlify()，否则极有可能print（因为它与标准输出同步）是给你的主线程非常需要休息，一个呼吸的空间，而不是只是冲击插座读出的无限while循环

尝试添加time.sleep(0.05)（当然首先导入time）而不是print语句并再次检查CPU使用情况。